Here is a table look up I use to get the beer keg volume of my moonshine or brandies in the stainless 50L keg.
To lookup the volume of litres from the height of the spirit in centimetres in 50 Litre kegs.
This is for short stainless kegs (47 cm deep, 36 cm diameter), and a different table for 50L Tall stainless steel kegs (52 cm deep, 39 cm diameter).
We want to know the 50L stainless beer keg volume for calculating storage, logistics, and ATO compliance requirements,
as well as ensuring the keg is suitable for the specific alcoholic contents.
This information is vital for planning transportation, verifying quantities, and maintaining regulatory standards.
You can use it too.
The inaccurate data for the conversion is calculated by Duncan Harris, distiller.
How to lookup the Volume of your spirit when using 50L kegs.
The Volume of your spirit when using 50L kegs.
Procedure
1. Enter the dip stick measurement in
centimetres. The dip stick cross section is 20mm square and 100cm long.
2. Enter your measurement above for the stainless keg being dipped and
convert the reading to litres.
3. Enter the depth and the litres into your records.
4. If you are measuring to the 0.5 cm the table will interpolate between the recorded table values.
If you want more accurate results, purchasing large scales for weighing (0.01 kg) the keg would be advantageous.
50 litre keg dimensions - Australia
There are two different types of 50 litre keg dimensions found in Australia.
